Search results for '5 Ghz'

SP140/SP141 Development Kit based on the QCA4002 - with Rev 3.2+ Firmware. For spec information send email to: info @ ar8031 dot com Learn More

WiGig and IEEE 802.11ad-2012 standard compliant and IEEE 802.11ac + 4.1 BT: - Supported Frequency Range: 57~64GHz - Supported Data Rate: MCS0, MCS1 (385Mbps) ~ MCS12 (4.6Gbps) - IEEE 802.11a/b/g/n/ac dual band MIMO - BT4.1 + HS, BLE, and ANT+ - M.2 2230-S3-A-E form factor: 22 x 30mm - Antenna array (use P/N: NGFF595A-L-Ant) Contact us for higher qty pricing. Learn More

SP144, QCA4004-based Wi-Fi module - with Rev 3.0 Firmware Learn More

WiGig and IEEE 802.11ad-2012 standard compliant - Supported Frequency Range: 57~64GHz - Supported Data Rate: MCS0, MCS1 (385Mbps) ~ MCS12 (4.6Gbps) - M.2 2230-S3-A-E form factor: 22 x 30mm - Supports up to Eight Antenna arrays (use P/N: NGFF595A-L-Ant) Contact us for higher qty pricing. Learn More

Qualcomm Atheros AR1540-AL3C-R

For production pricing contact us at 1-408-676-7098;

For datasheet and design information send email to:

info @ ar8031 dot com

No Tariff

Learn More

Contact us for volume pricing

Red Bean-Ant Industrial SDIO Wifi module is a Qualcomm Atheros QCA9377-3-based SDIO Wifi module, fully certified module.  It is a surface mount SDIO radio module ideal for ultra low power applications.
It has an integrated dual-band (2.4 and 5 GHz) 1x1 802.11ac Wave2 WiFi (supporting MU-MIMO) and Bluetooth® 5.0  All of this is combined into a very small form factor (17 x 12 mm without antenna or 24 x 12 mm with an integrated antenna).
The radio module supports advanced power saving techniques. Bluetooth supports both Class1 and Class2 transmissions and advanced coexistance mechanisms allow it to work seamlessly with Wi-Fi ensuring good quality and high performance.
Linux, Windows 10 and Android drivers for the RED bean module are available.

Quick Specs:

• 802.11a/b/g/n/ac, 2.4 and 5 GHz, 1x1 SISO, 433 Mbps data rate, up to 20 dBm output power
• 20/40/80 MHz channel size support
• STBC, MU-MIMO, transmit beam-forming
• Bluetooth v5 + HS backwards compatible with v1.x and v2.x
• Connectorized (Murata HSC type connector: MM4829- 2702RB0) or an integrated dual-band antenna version
• Linux, Windows and Android drivers available
• Based on QCA9377-3 chipset (SDIO)
• Industrial temperature range -40 to +85 C°
• Very small form factor (17 by 12 mm without antenna or 24 by 12 mm with antenna)
• Surface mount, dual-side design
• Available interfaces - Bluetooth UART, WLAN SDIO
• With onboard Antenna, for exteranl antenna option, see Red-Bean-C

Certiffications:

• FCC (US):       Q1-2019

• CE (Europe):   Q1-2019
• IC (Canada):   Q1-2019
• Telec (Japan): Pending
• Other:              Contact us

Learn More

Killer™ Wireless AX1650 Wifi Module

Powered by all-new Wi-Fi 6 technology using 160 MHz Channels.  When connected to a Wi-Fi 6 access point,  the AX1650 delivers nearly 3x more throughput than previous generation 80 MHz 2x2 AC devices

Learn More

GT141-LM4, Certified Production Wi-Fi IoE module using Qualcomm Atheros QCA4002 - with Rev 3.2+ Firmware (equivalent to SP141)

For production pricing contact us at 1-408-676-7098 For datasheet information send email to: info @ ar8031 dot com

Learn More

SSC P485 PL Transceiver IC

For production pricing contact us at 1-408-676-7098;

For datasheet and design information send email to:

info @ ar8031 dot com

No Tariff

 

Features Enables low-cost networking products Spread Spectrum Carrier communication technology 9600 baud data rate Simple interface Single +5 V power supply requirement 20 pin SOIC package

Learn More