Search results for '1'
-
SP140/SP144 Dev Kit - with Rev 3.2+ Firmware
$295.00 As low as: $275.00SP140/SP144 Development Kit based on the QCA4004 - with Rev 3.2+ Firmware For spec information send email to: info @ ar8031 dot com Learn More -
NGFF695A-L, Qualcomm Atheros QCA6335-based 802.11ad WiGig M.2 Module (without RF WiGig antenna module)
$150.00WiGig and IEEE 802.11ad-2012 standard compliant - Supported Frequency Range: 57~64GHz - Supported Data Rate: MCS0, MCS1 (385Mbps) ~ MCS12 (4.6Gbps) - M.2 2230-S3-A-E form factor: 22 x 30mm - Supports up to Eight Antenna arrays (use P/N: NGFF595A-L-Ant) Contact us for higher qty pricing. Learn More -
SP141, QCA4002-based Wi-Fi module - with Rev 3.0 Firmware
$14.00 As low as: $9.75SP141, QCA4002-based Wi-Fi module - with Rev 3.0 Firmware Learn More -
Qualcomm Atheros AR1540-AL3C-R
$1.75Qualcomm Atheros AR1540-AL3C-R
For production pricing contact us at 1-408-676-7098;
For datasheet and design information send email to:
info @ ar8031 dot com
No Tariff
Learn More -
Red Bean-Ant Industrial SDIO Module (by 8Devices), Qualcomm Atheros QCA9377-3-based 802.11 a/b/g/n/ac, 2.4 & 5.0 GHz, 1x1 SDIO WiFi & 5.0 Bluetooth Module
$10.50Contact us for volume pricing
Red Bean-Ant Industrial SDIO Wifi module is a Qualcomm Atheros QCA9377-3-based SDIO Wifi module, fully certified module. It is a surface mount SDIO radio module ideal for ultra low power applications.
It has an integrated dual-band (2.4 and 5 GHz) 1x1 802.11ac Wave2 WiFi (supporting MU-MIMO) and Bluetooth® 5.0 All of this is combined into a very small form factor (17 x 12 mm without antenna or 24 x 12 mm with an integrated antenna).
The radio module supports advanced power saving techniques. Bluetooth supports both Class1 and Class2 transmissions and advanced coexistance mechanisms allow it to work seamlessly with Wi-Fi ensuring good quality and high performance.
Linux, Windows 10 and Android drivers for the RED bean module are available.Quick Specs:
• 802.11a/b/g/n/ac, 2.4 and 5 GHz, 1x1 SISO, 433 Mbps data rate, up to 20 dBm output power
Certiffications:• FCC (US): Q1-2019• CE (Europe): Q1-2019
• 20/40/80 MHz channel size support
• STBC, MU-MIMO, transmit beam-forming
• Bluetooth v5 + HS backwards compatible with v1.x and v2.x
• Connectorized (Murata HSC type connector: MM4829- 2702RB0) or an integrated dual-band antenna version
• Linux, Windows and Android drivers available
• Based on QCA9377-3 chipset (SDIO)
• Industrial temperature range -40 to +85 C°
• Very small form factor (17 by 12 mm without antenna or 24 by 12 mm with antenna)
• Surface mount, dual-side design
• Available interfaces - Bluetooth UART, WLAN SDIO
• With onboard Antenna, for exteranl antenna option, see Red-Bean-C
• IC (Canada): Q1-2019
• Telec (Japan): Pending
• Other: Contact us Learn More -
Killer™ AX1675 Gaming Wi-Fi modules
$17.27 As low as: $16.63Killer™ Wireless AX1675 Wifi Module
Powered by all-new Wi-Fi 6E technology, up to 75% less latency while gaming when multitasking, nearly 3x faster than 2x2 80 MHz wireless-AC devices.
Learn More -
GT144-LM4, Production Wi-Fi IoE module using Qualcomm Atheros QCA4004 - with Rev 3.2+ Firmware (equivalent to SP144)
$18.00 As low as: $9.75GT144-LM4, Production Wi-Fi IoE module using Qualcomm Atheros QCA4004 - with Rev 3.2+ Firmware (equivalent to SP144).
For production pricing contact us at 1-408-676-7098 For datasheet information send email to: info @ ar8031 dot com For SDK please contact us.
Learn More -
SSC P485 PL Transceiver IC
$11.48SSC P485 PL Transceiver IC
For production pricing contact us at 1-408-676-7098;
For datasheet and design information send email to:
info @ ar8031 dot com
No Tariff
Learn MoreFeatures
Enables low-cost networking products
Spread Spectrum Carrier communication technology
9600 baud data rate
Simple interface
Single +5 V power supply requirement
20 pin SOIC package
-
SP140/SP141 Dev Kit - with Rev 3.2+ Firmware
$290.00 As low as: $270.00SP140/SP141 Development Kit based on the QCA4002 - with Rev 3.2+ Firmware. For spec information send email to: info @ ar8031 dot com Learn More -
NGFF595A-L-Ant, Qualcomm Atheros QCA6310-based 802.11ad WiGig RF Antenna Module
$85.00NGFF595A-L-Ant, Qualcomm Atheros QCA6310-based 802.11ad WiGig RF Antenna Module Used for NGFF695A-L (up to eight per module) or NGFF595-L (one per module) 802.11ad WiGig modules. Features: - WiGig and IEEE 802.11ad standard compliant - Supported Frequency Range: 57~66GHz - Supporting single connector/cable with multiplexed input signals. - WiGig/802.11ad connector on module: Murata MM5829-2700 - Low and various power consumption 0.2W~1.0W, according to the usage model. - 3-dimensional 32-antenna-element array. - Support the following usage models: - Docking devices - Personal computers - Tablets - RoHS compliant Physical Dimension/Packaging: Dimension: (7.9+/-0.3) x (17.55+/-0.3) x (1.95+/-0.15) mm Learn More