Search results for 'data sheet of QCA4002-based Wi-Fi module'
-
SSC P485 PL Transceiver IC
$11.48SSC P485 PL Transceiver IC
For production pricing contact us at 1-408-676-7098;
For datasheet and design information send email to:
info @ ar8031 dot com
No Tariff
Features
Enables low-cost networking products
Spread Spectrum Carrier communication technology
9600 baud data rate
Simple interface
Single +5 V power supply requirement
20 pin SOIC package
-
Leadman Electronics 10G SFP+ Quad Port Fiber Front Load Networking Module
$199.00Leeadman Electronics 10G SFP+ Quad Port Fiber Front Load Networking Module
Features:
- Intel 82599 EB
- PCI-e x8 interface with PLX controller
- Quad 10G SFP+ port
- Ideal solution for implementing multiple network segments
Contact us for datasheets, volume pricing and customization requirements. -
SP141, QCA4002-based Wi-Fi module - with Rev 3.0 Firmware
$14.00 As low as: $9.75SP141, QCA4002-based Wi-Fi module - with Rev 3.0 Firmware Learn More -
Siretta TANGO39/1M/SMAM/S/S/17
$24.71Siretta Antenna: TANGO39/1M/SMAM/S/S/17
433MHz ISM band panel mounting puck Antenna, 1 m cable with Male SMA Connector
The Tango 39 is a compact puck shaped antenna tuned to the 433MHz ISM band. Typical applications are garage remote control systems, property alarms, wireless sensor connections, TETRA Radio System Base Units and LoRa EU433 IoT device connections. The antenna is supplied as standard with an SMA male connector on 1 m of cable. Alternative connectors and cable lengths can be specified for volume orders.• 433MHz ISM band frequency
• Compact puck design
• 1dBi Peak Gain
• TETRA Compatible
• IP67 RatedContact us for volume pricing, full datasheet, other information, or customization requests.
-
Siretta SNYPER-5G Graphyte (GL) Cellular Network Signal Analyzer/Logger: Surveys & Logs CAT-M, NB-IoT, 2G, 3G, 4G/LTE & 5G (Global Freq Coverage) with Accessories and Hard Carry Case
$2,239.87SNYPER-5G GRAPHYTE (GL)
Cat-M, NB-IoT, 2G, 3G, 4G/LTE & 5G Signal Analyser & Datalogger
General Description
The SNYPER-5G Graphyte (GL) is a high performance, multi-language network signal analyser and cellular signal logger, dedicated to surveying and logging the 5G/NR 4G/LTE , LTE-Cat M, NB-IoT & 2G/GSM networks.
It incorporates a number of important features::
- Enhanced cellular surveying & sequential logging of new and existing installations on 5G. 4G, Cat M, NB-IoT and 2G networks
- 5G NSA Cells Identified (Based on USER SUPPLIED SIM)
- User selectable survey logging options to determine most suitable & reliable mobile operator
- Evaluate “preferred” MNO’s performance over time
- Determines “hotspots” & assist with antenna alignment, through Siretta’s liveSCAN feature
- Results are reported in CSV, graphical HTML format & Print to PDF
- Save over 100 logged surveys with multiple liveSCAN logs
The unit can be left to conduct sequential surveys in a fixed location and automatically saving them. Four types of survey can be performed: a “FULL” survey (5G, 4G or CAT-M, NB-IoT, GSM combined), or a single selected technology only.
The SNYPER-5G Graphyte is capable of detecting 5G SA Cells without requiring a 5G SIM Card. However, if you require analysing 5G NSA Cells, a valid 5G SIM card is required. The SNYPER device will then display the 5G NSA cells of the network that the SIM card operates on. This is due to the specific way 5G NSA operates.
The U.S. National Telecommunications and Information Administration has an informative short video explaining how the 5G NR architecture is split into SA and NSA here:
For more information on 5G Technology please click here:
SNYPER-5G Graphyte (GL) can save a limitless amount of surveys each with different logging options and all survey results can be downloaded to a PC and displayed in a HTML graphical format to clearly show the logged detail over the survey session. This can identify unreliable base-stations & intermittent cellular service which is not possible with spot surveys. The full breakdown for the HTML summary graphs are displayed in corresponding CSV files (Summary and full detail files).
The SNYPER-5G Graphyte (GL) also incorporates Siretta’s leading liveSCAN feature, which allows you to select a base-station signal immediately after a survey, conduct a liveSCAN logging session which can later be analysed in a CSV logged recording.
The SNYPER-5G Graphyte (GL) is an invaluable tool for understanding local network performance over hours, days and weeks to assist in the selection of reliable mobile network operators before cellular installations.
Contact us for volume pricing, full datasheet, Start-up Guide, training and other information.
-
Qualcomm Atheros AR1540-AL3C-R
$1.75Qualcomm Atheros AR1540-AL3C-R
For production pricing contact us at 1-408-676-7098;
For datasheet and design information send email to:
info @ ar8031 dot com
No Tariff
Learn More -
LinkCom LCVE0060U125-00G, LED Driver - LinkCom 60W LCVE-Series, Constant Voltage LED Driver
$22.36 As low as: $17.97LinkCom P/N: LCVE0060U125-00G, LED Driver - LinkCom 60W LCVE-Series, Constant Voltage LED Drivers
● 100-277Vac
● Design for Constant Voltage
● Metal Case, Waterproof: IP67
● Application: Outdoor LED lighting
Features:
- AC Input 100~277VAC
- Built-in Active PFC Function
- Protection: SCP / OVP / OTP
- Surge protection
- Safety: UL8750 ,Type TL, Type HL
- EMI: FCC / CE
- Metal Case, Waterproof IP 67 Compliant
- Warranty: 1 year (refer to warranty policy)
- RoHS Compliant
Contact us for volume pricing, full datasheet, other information, or customization requests.
-
Fairway Electronic FWY-K300S**- L Series - 2” × 4”, 150 W / 300 W, Open Frame, High Density, Industrial Power Supply
$0.00Fairway Electronic FWY-K300S**- L Series:
P/N: FWY-K300S12-L
* Input: 100-240V, 3.6 A max, 50-60 Hz
* Output: +12V, 11.67 A (Convection Cooling), +12V, 21.66 A (Forced Air & Conduction Cooling)
* 2 × 4” High Density, High Power, Industrial Open Frame Power Supply
* +85 deg C high temperature, environment application, industrial temperature
* 150W natural convection cooled* 180W conduction cooled
* 280W forced air convection* 300W conduction cooled with Fan
* 5,000 meter operating altitude
* No load consumption < 0.2 W
* Built-in OCP(Auto); OVP(Latch)* High capacitive load ability: 700~13,000uF
* EMI certifications: EN 55032 class B, CE-EMC
* Safety certifications: UL/cUL/EN62368-1, CB report, CE mark
Applications in personal computer, networking, measurement equipment, telecom / datacom, industrial control systems and automation.3 year Warranty
Made in Taiwan
Contact us for pricing
Learn More -
Leadman Electronics Front Load Appliance
$899.00Leeadman Electronics Front Load Appliance
Features:
- Dual Intel Xeon E5-2600 V3, C612 Express Controller
- 16x ECC DDR4-2133Mhz DIMMs supporting up to 512GB RDIMM or 1TB LRDIMM
- 4x Front Load PCI-e Gen 3 Networking module
- 4x 2.5” Hot swappable Enterprise Drive bay
- 1x 3.5” Drive Bay
- BMC/IPMI Management Port
- Front access: 2x 1Gbe Network Port, Console Port, VGA, and USB
- Hot swappable Fan Module
- Redundant Power Supply
Contact us for datasheets, volume pricing and customization requirements. -
SP144, QCA4004-based Wi-Fi module - with Rev 3.0 Firmware
$20.00 As low as: $16.65SP144, QCA4004-based Wi-Fi module - with Rev 3.0 Firmware Learn More