8Devices Single-band SOMs

8Devices Lima Industrial Temp Range Qualcomm Atheros QCA4531-based 802.11 b/g/n, 2.4 GHz, 2x2 MIMO WiFi Router/Module - Fully Certified

• 802.11 b/g/n, 2.4 GHz, 2x2 MIMO, 300 Mbps data rate, 21 dB per chain output power
• U.FL connectors or external pin for external antenna
• 16 MB FLASH, 64 MB DDR2 RAM
• Linux friendly , OpenWRT flash image and source code are available for download on www.8devices.com/wiki_lima
• CPU – QCA4531, 650 MHz clock speed
• Small form factor (25 by 35 mm)
• Surface mountable, dual-side design
• Available interfaces - USB 2.0 host, serial port, 2 x Ethernet, i2C, UART, PCIe, GPIO
• Industrial  Temp Range -40 to +85 deg Celsius (see Commerical Temp Range product for -0 to +70 deg Celsius version)

Development board (LimaDev Kit) and drivers available.

Certifications:

8Devices Lima Commercial Temp Range Qualcomm Atheros QCA4531-based 802.11 b/g/n, 2.4 GHz, 2x2 MIMO WiFi Router/Module - Fully Certified

• 802.11 b/g/n, 2.4 GHz, 2x2 MIMO, 300 Mbps data rate, 21 dB per chain output power
• U.FL connectors or external pin for external antenna
• 16 MB FLASH, 64 MB DDR2 RAM
• Linux friendly , OpenWRT flash image and source code are available for download on www.8devices.com/wiki_lima
• CPU – QCA4531, 650 MHz clock speed
• Small form factor (25 by 35 mm)
• Surface mountable, dual-side design
• Available interfaces - USB 2.0 host, serial port, 2 x Ethernet, i2C, UART, PCIe, GPIO
• Commercial Temp Range 0 to +70 deg Celsius (see Industrial Temp Range product for -40 to +85 deg Celsius version)

Development board (LimaDev Kit) and drivers available.

Certifications:

8Devices Lima Development Board comes with Lima Commercial Temp Range Qualcomm Atheros QCA4531-based 802.11 b/g/n, 2.4 GHz, 2x2 MIMO WiFi Router/Module - Fully Certified

• 802.11 b/g/n, 2.4 GHz, 2x2 MIMO, 300 Mbps data rate, 21 dB per chain output power
• U.FL connectors or external pin for external antenna
• 16 MB FLASH, 64 MB DDR2 RAM
• Linux friendly , OpenWRT flash image and source code are available for download on www.8devices.com/wiki_lima
• CPU – QCA4531, 650 MHz clock speed
• Small form factor (25 by 35 mm)
• Surface mountable, dual-side design
• Available interfaces - USB 2.0 host, serial port, 2 x Ethernet, i2C, UART, PCIe, GPIO
• Commercial Temp Range 0 to +65 deg Celsius (see Industrial Temp Range product for -40 to +85 deg Celsius version)

Kinkan is packed with an extensive set of interfaces and robust 1GHz CPU based on MIPS 24Kc core. Module dimensions 19.5 mm x 26.7 mm. Back side of the module is component free and module is implemented in LGA (land grid array) form for compact surface mount designs. Built in 128MB RAM and 32MB FLASH lets comfortably run embedded Linux applications under OpenWRT.
Kinkan supports GPIO, I2C, SPI, UART, I2S, PCM/SLIC, USB2.0 host, USB2.0 host/device, PCIe, MDIO, PWM, RGMII, 100BaseT PHY, SDXC SD Card, eMMC module, SPI and parallel NAND and can boot from SD card, eMMC module built in NOR, external SPI and parallel NAND FLASH.
High performance is not affecting low power consumption with the load on LAN and WLAN interfaces it consumes up to 4W of power.

Quick Specs:

• 802.11 b/g/n 2.4 GHz, 2x2 MIMO, 300 Mbps data rate
• 32 MB FLASH, 128 MB RAM
• Linux friendly , OpenWRT flash image and source code are available for download on www.8devices.com/wiki_kinkan
• CPU – RTL8197FS (1 GHz CPU based on MIPS 24Kc core)
• 22 dBm per chain output power radio
• Small form factor - 19.5 by 26.7 mm
• Surface mountable (LGA form), single side design
• Available interfaces - GPIO, I2C, SPI, UART, I2S, PCM/SLIC, USB2.0 host, USB2.0 host/device, PCIe, MDIO, PWM, RGMII, 100BaseT PHY, SDXC SD Card, eMMC module, SPI and parallel NAND flash

Kinkan is packed with an extensive set of interfaces and robust 1GHz CPU based on MIPS 24Kc core. Module dimensions 19.5 mm x 26.7 mm. Back side of the module is component free and module is implemented in LGA (land grid array) form for compact surface mount designs. Built in 128MB RAM and 32MB FLASH lets comfortably run embedded Linux applications under OpenWRT.
Kinkan supports GPIO, I2C, SPI, UART, I2S, PCM/SLIC, USB2.0 host, USB2.0 host/device, PCIe, MDIO, PWM, RGMII, 100BaseT PHY, SDXC SD Card, eMMC module, SPI and parallel NAND and can boot from SD card, eMMC module built in NOR, external SPI and parallel NAND FLASH.
High performance is not affecting low power consumption with the load on LAN and WLAN interfaces it consumes up to 4W of power.

Quick Specs:

• 802.11 b/g/n 2.4 GHz, 2x2 MIMO, 300 Mbps data rate
• 32 MB FLASH, 128 MB RAM
• Linux friendly , OpenWRT flash image and source code are available for download on www.8devices.com/wiki_kinkan
• CPU – RTL8197FS (1 GHz CPU based on MIPS 24Kc core)
• 22 dBm per chain output power radio
• Small form factor - 19.5 by 26.7 mm
• Surface mountable (LGA form), single side design
• Available interfaces - GPIO, I2C, SPI, UART, I2S, PCM/SLIC, USB2.0 host, USB2.0 host/device, PCIe, MDIO, PWM, RGMII, 100BaseT PHY, SDXC SD Card, eMMC module, SPI and parallel NAND flash

Centipede is a Qualcomm Atheros AR9331 SoC based DIP platform with an integrated 2.4 GHz 802.11n (1x1) radio.

Its tiny form factor (22 x 60 mm), integrated RJ-45, an on-board omni-directional chip antenna and "breadboardable" layout allows easy integration into any hardware design with a quick time to market approach.
Extremely low cost and CE, FCC* and IC* certification make this platform very attractive for the DIY and small-scale projects requiring wi-fi connectivity without substantial investment in RF design.
Centipede is running OpenWrt Linux. Source code with all the necessary patches is provided on a Github https://github.com/8devices and is supported by the growing community on our forum http://www.8devices.com/community.

For datasheet, and other information, go to: 8Devices Centipede Info.

Contact us

For datasheet, Reference Design information, Drivers, Certifications, higher volume pricing, please contact us.

8Devices Carambola2-Industrial-DVK with enclosure, Qualcomm Atheros AR9331-based 802.11n 1x1 WiFi Router - Fully Certified Development Board includes: - Integrated 2.4 GHz chip antenna - 2 x 10 2.54 mm pitch prototyping area holes - ETH0 LAN port - ETH1 LAN port - Type A USB socket - Mini - A USB socket (console + power 5V) - Hardware reset button - GPIO programable button Wifi Module: • 802.11 b/g/n, 2.4 GHz, 1x1 SISO, 150MBps max data rate, 21 dB output power • U.FL connector or external pin for external antenna • 16 MB FLASH, 64 MB DDR2 RAM • Linux friendly , OpenWRT flash image and source code are available for download on www.8devices.com/wiki_carambola • CPU – AR9331, 400 MHz clock speed • 28 by 38 mm Size – small and easy to embed • Surface mountable • Power supply - 3.3 V, power consumption 0.5 W • Available interfaces - USB host/slave, serial port, 2 x Ethernet, i2S, SLIC, SPDIF, 23 x GPIO Drivers available.

-40 to +86 deg C temp range product.  Includes fully assembled into C2-DVK enclosure and custom label (if required).

Module Certifications:

For datasheet, and other information, go to: 8Devices Carambola2 info.

Contact us

For datasheet, Reference Design information, Drivers, Certifications, higher volume pricing, please contact us.

8Devices Carambola2-Industrial-DVK, Qualcomm Atheros AR9331-based 802.11n 1x1 WiFi Router - Fully Certified Development Board includes: - Integrated 2.4 GHz chip antenna - 2 x 10 2.54 mm pitch prototyping area holes - ETH0 LAN port - ETH1 LAN port - Type A USB socket - Mini - A USB socket (console + power 5V) - Hardware reset button - GPIO programable button Wifi Module: • 802.11 b/g/n, 2.4 GHz, 1x1 SISO, 150MBps max data rate, 21 dB output power • U.FL connector or external pin for external antenna • 16 MB FLASH, 64 MB DDR2 RAM • Linux friendly , OpenWRT flash image and source code are available for download on www.8devices.com/wiki_carambola • CPU – AR9331, 400 MHz clock speed • 28 by 38 mm Size – small and easy to embed • Surface mountable • Power supply - 3.3 V, power consumption 0.5 W • Available interfaces - USB host/slave, serial port, 2 x Ethernet, i2S, SLIC, SPDIF, 23 x GPIO Drivers available.

-40 to +86 deg C temp range product.  Also available with enclosure, up to IP67 (if required - custom assembly/pricing - contact us).

Module Certifications:

For datasheet, and other information, go to: 8Devices Carambola2 info.

8Devices Carambola2 Industrial Temp Range Qualcomm Atheros AR9331-based 802.11n 1x1 WiFi Router/Module - Fully Certified

• 802.11 b/g/n, 2.4 GHz, 1x1 SISO, 150MBps max data rate, 21 dB output power
• U.FL connector or external pin for external antenna
• 16 MB FLASH, 64 MB DDR2 RAM
• Linux friendly , OpenWRT flash image and source code are available for download on www.8devices.com/wiki_carambola
• CPU – AR9331, 400 MHz clock speed 
• 28 by 38 mm Size – small and easy to embed 
• Surface mountable
• Power supply - 3.3 V, power consumption 0.5 W
• Industrial Temp Range -40 to +85 deg Celsius (see Commercial Temp Range product for -0 to +70 deg Celsius version)

Available interfaces - USB host/slave, serial port, 2 x Ethernet, i2S, SLIC, SPDIF, 23 x GPIO Development board (Carambola2 Dev Kit) and drivers available.

Certifications:

For datasheet, and other information, go to: 8Devices Carambola2 info.

Contact us

For datasheet, Reference Design information, Drivers, Certifications, higher volume pricing, please contact us.