8Devices

Kinkan is packed with an extensive set of interfaces and robust 1GHz CPU based on MIPS 24Kc core. Module dimensions 19.5 mm x 26.7 mm. Back side of the module is component free and module is implemented in LGA (land grid array) form for compact surface mount designs. Built in 128MB RAM and 32MB FLASH lets comfortably run embedded Linux applications under OpenWRT.
Kinkan supports GPIO, I2C, SPI, UART, I2S, PCM/SLIC, USB2.0 host, USB2.0 host/device, PCIe, MDIO, PWM, RGMII, 100BaseT PHY, SDXC SD Card, eMMC module, SPI and parallel NAND and can boot from SD card, eMMC module built in NOR, external SPI and parallel NAND FLASH.
High performance is not affecting low power consumption with the load on LAN and WLAN interfaces it consumes up to 4W of power.

Quick Specs:

• 802.11 b/g/n 2.4 GHz, 2x2 MIMO, 300 Mbps data rate
• 32 MB FLASH, 128 MB RAM
• Linux friendly , OpenWRT flash image and source code are available for download on www.8devices.com/wiki_kinkan
• CPU – RTL8197FS (1 GHz CPU based on MIPS 24Kc core)
• 22 dBm per chain output power radio
• Small form factor - 19.5 by 26.7 mm
• Surface mountable (LGA form), single side design
• Available interfaces - GPIO, I2C, SPI, UART, I2S, PCM/SLIC, USB2.0 host, USB2.0 host/device, PCIe, MDIO, PWM, RGMII, 100BaseT PHY, SDXC SD Card, eMMC module, SPI and parallel NAND flash

8Devices Jalapeno Development Board is a very powerful quad-core CPU based module with dual band concurrent radio supporting 802.11ac Wave 2 technology.

• 802.11 a/b/g/n/ac Wave 2, 2.4 and 5 GHz, 2x2 MIMO, 300 and 867 Mbps data rate, 23 dBm per chain output power
• U.FL connectors for external antenna
• 128 MB NAND and 8 MB NOR FLASH, 256 MB DDR3 RAM
• Linux friendly , OpenWRT flash image and source code are available for download on www.8devices.com/wiki_jalapeno
• CPU – IPQ 4018 (700 MHz quad core Cortex A7)
• 23 dBm per chain output power dual-band concurrent radio with dedicated Tensilica CPU and 802.11ac Wave 2 support
• 32 by 47 mm size
• Surface mountable, dual-side design
• Available interfaces - USB 2.0, USB 3.0, I2C, I2S, TDM, SPI, UART, GPIO, JTAG and 2 x 1000 Base-T Ethernet ports

Jalapeno is based on an IPQ4018 SoC from Qualcomm Atheros, which is an extremely powerful quad core 700MHz CPU Cortex A7 CPU with NEON (high-performance media engine), ideal for routers, gateways and access points. It is a surface mountable, dual-sided, Wi-Fi enabled Linux module.

It comes with a high-power (23 dBm per chain) dual-band concurrent radio supporting 802.11ac Wave 2 technology (2x2 MiMo) reaching 1.167 Gbps data rate. USB3, USB2, I2C, I2S, UART, GPIO are the interfaces available on the module together with two Gigabit Ethernet ports. SoC has hardware NAT engine and high-end security features like crypto engine, secure boot and others.

OpenWRT linux distribution source code is available on GitHub https://github.com/8devices and is supported by our growing community on http://www.8devices.com/community forum.

Certifications:

8Devices Jalapeno Development Board is a very powerful quad-core CPU based module with dual band concurrent radio supporting 802.11ac Wave 2 technology.

• 802.11 a/b/g/n/ac Wave 2, 2.4 and 5 GHz, 2x2 MIMO, 300 and 867 Mbps data rate, 23 dBm per chain output power
• U.FL connectors for external antenna
• 128 MB NAND and 8 MB NOR FLASH, 256 MB DDR3 RAM
• Linux friendly , OpenWRT flash image and source code are available for download on www.8devices.com/wiki_jalapeno
• CPU – IPQ 4018 (700 MHz quad core Cortex A7)
• 23 dBm per chain output power dual-band concurrent radio with dedicated Tensilica CPU and 802.11ac Wave 2 support
• 32 by 47 mm size
• Surface mountable, dual-side design
• Available interfaces - USB 2.0, USB 3.0, I2C, I2S, TDM, SPI, UART, GPIO, JTAG and 2 x 1000 Base-T Ethernet ports

Jalapeno is based on an IPQ4018 SoC from Qualcomm Atheros, which is an extremely powerful quad core 700MHz CPU Cortex A7 CPU with NEON (high-performance media engine), ideal for routers, gateways and access points. It is a surface mountable, dual-sided, Wi-Fi enabled Linux module.

It comes with a high-power (23 dBm per chain) dual-band concurrent radio supporting 802.11ac Wave 2 technology (2x2 MiMo) reaching 1.167 Gbps data rate. USB3, USB2, I2C, I2S, UART, GPIO are the interfaces available on the module together with two Gigabit Ethernet ports. SoC has hardware NAT engine and high-end security features like crypto engine, secure boot and others.

OpenWRT linux distribution source code is available on GitHub https://github.com/8devices and is supported by our growing community on http://www.8devices.com/community forum.

Module Certifications:

Habanero system on module (SOM) is based on an IPQ4019 SoC from Qualcomm, which incorporates a powerful quad-core ARM Cortex A7 processor with NEON and FPU. It is ideal for resource demanding applications including routers, gateways and access points. Habanero comes with a high-power, dual-band concurrent radio supporting 802.11ac Wave2 technology (2x2 MiMo). QCA8075C PHY gives support to 5 x Gigabit Ethernet ports. It also has 1 x USB3.0 and 1 x USB2.0 ports and supports other miscellaneous interfaces, which can be configured as general-purpose I/O pins. Hardware based NAT engine and security features like crypto engine, secure boot make it ideal for high-end, fast and secure networking applications. Habanero comes in commercial and industrial temperature versions. Commercial temperature range: 0-65°C, industrial temperature range: -40-85°C.

Quick Specs:

• Wi-Fi 5 (802.11a/n/ac Wave2) 5GHz with 2x2 MU-MiMo, 866.7Mbps data-rate
• Wi-Fi 5 (802.11b/g/n/ac) 2.4GHz, 400Mbps data-rate
• MIPI DBI v2.0 type B interface
• CPU - IPQ4019/IPQ4029 ( 716.8MHz)
• OpenWRT Linux flash image
• 24-25 dBm per chain RF output power
• Size - 45 by 49 mm
• Available interfaces – 46 x GPIO, 1 x PCie 2.0, 1 x USB3.0, 1 x USB2.0, 2 x UART, 1 x SPI, 2 x I2C, 4 x PWM, 1 x JTAG, 1 x I2S/TDM,
5 x 1000/100/10 ethernets, 1 x RGMII, 1 x SDIO3.0/eMMC and parallels for NAND flash memory and LCD controller

Habanero system on module (SOM) is based on an IPQ4019 SoC from Qualcomm, which incorporates a powerful quad-core ARM Cortex A7 processor with NEON and FPU. It is ideal for resource demanding applications including routers, gateways and access points. Habanero comes with a high-power, dual-band concurrent radio supporting 802.11ac Wave2 technology (2x2 MiMo). QCA8075C PHY gives support to 5 x Gigabit Ethernet ports. It also has 1 x USB3.0 and 1 x USB2.0 ports and supports other miscellaneous interfaces, which can be configured as general-purpose I/O pins. Hardware based NAT engine and security features like crypto engine, secure boot make it ideal for high-end, fast and secure networking applications. Habanero comes in commercial and industrial temperature versions. Commercial temperature range: 0-65°C, industrial temperature range: -40-85°C.

Quick Specs:

• Wi-Fi 5 (802.11a/n/ac Wave2) 5GHz with 2x2 MU-MiMo, 866.7Mbps data-rate
• Wi-Fi 5 (802.11b/g/n/ac) 2.4GHz, 400Mbps data-rate
• MIPI DBI v2.0 type B interface
• CPU - IPQ4019/IPQ4029 ( 716.8MHz)
• OpenWRT Linux flash image
• 24-25 dBm per chain RF output power
• Size - 45 by 49 mm
• Available interfaces – 46 x GPIO, 1 x PCie 2.0, 1 x USB3.0, 1 x USB2.0, 2 x UART, 1 x SPI, 2 x I2C, 4 x PWM, 1 x JTAG, 1 x I2S/TDM,
5 x 1000/100/10 ethernets, 1 x RGMII, 1 x SDIO3.0/eMMC and parallels for NAND flash memory and LCD controller

Habanero system on module (SOM) is based on an IPQ4019 SoC from Qualcomm, which incorporates a powerful quad-core ARM Cortex A7 processor with NEON and FPU. It is ideal for resource demanding applications including routers, gateways and access points. Habanero comes with a high-power, dual-band concurrent radio supporting 802.11ac Wave2 technology (2x2 MiMo). QCA8075C PHY gives support to 5 x Gigabit Ethernet ports. It also has 1 x USB3.0 and 1 x USB2.0 ports and supports other miscellaneous interfaces, which can be configured as general-purpose I/O pins. Hardware based NAT engine and security features like crypto engine, secure boot make it ideal for high-end, fast and secure networking applications. Habanero comes in commercial and industrial temperature versions. Commercial temperature range: 0-65°C, industrial temperature range: -40-85°C.

Quick Specs:

• Wi-Fi 5 (802.11a/n/ac Wave2) 5GHz with 2x2 MU-MiMo, 866.7Mbps data-rate
• Wi-Fi 5 (802.11b/g/n/ac) 2.4GHz, 400Mbps data-rate
• MIPI DBI v2.0 type B interface
• CPU - IPQ4019/IPQ4029 ( 716.8MHz)
• OpenWRT Linux flash image
• 24-25 dBm per chain RF output power
• Size - 45 by 49 mm
• Available interfaces – 46 x GPIO, 1 x PCie 2.0, 1 x USB3.0, 1 x USB2.0, 2 x UART, 1 x SPI, 2 x I2C, 4 x PWM, 1 x JTAG, 1 x I2S/TDM,
5 x 1000/100/10 ethernets, 1 x RGMII, 1 x SDIO3.0/eMMC and parallels for NAND flash memory and LCD controller

Centipede is a Qualcomm Atheros AR9331 SoC based DIP platform with an integrated 2.4 GHz 802.11n (1x1) radio.

Its tiny form factor (22 x 60 mm), integrated RJ-45, an on-board omni-directional chip antenna and "breadboardable" layout allows easy integration into any hardware design with a quick time to market approach.
Extremely low cost and CE, FCC* and IC* certification make this platform very attractive for the DIY and small-scale projects requiring wi-fi connectivity without substantial investment in RF design.
Centipede is running OpenWrt Linux. Source code with all the necessary patches is provided on a Github https://github.com/8devices and is supported by the growing community on our forum http://www.8devices.com/community.

For datasheet, and other information, go to: 8Devices Centipede Info.

Contact us

For datasheet, Reference Design information, Drivers, Certifications, higher volume pricing, please contact us.

Carambola2-WeIO is an innovative open source hardware and software platform for rapid prototyping and creation of wirelessly connected interactive objects using only popular web languages such as HTML5 or Python.

For datasheet, and other information, go to: 8Devices WeIO info.

8Devices Carambola2-Industrial-DVK with enclosure, Qualcomm Atheros AR9331-based 802.11n 1x1 WiFi Router - Fully Certified Development Board includes: - Integrated 2.4 GHz chip antenna - 2 x 10 2.54 mm pitch prototyping area holes - ETH0 LAN port - ETH1 LAN port - Type A USB socket - Mini - A USB socket (console + power 5V) - Hardware reset button - GPIO programable button Wifi Module: • 802.11 b/g/n, 2.4 GHz, 1x1 SISO, 150MBps max data rate, 21 dB output power • U.FL connector or external pin for external antenna • 16 MB FLASH, 64 MB DDR2 RAM • Linux friendly , OpenWRT flash image and source code are available for download on www.8devices.com/wiki_carambola • CPU – AR9331, 400 MHz clock speed • 28 by 38 mm Size – small and easy to embed • Surface mountable • Power supply - 3.3 V, power consumption 0.5 W • Available interfaces - USB host/slave, serial port, 2 x Ethernet, i2S, SLIC, SPDIF, 23 x GPIO Drivers available.

-40 to +86 deg C temp range product.  Includes fully assembled into C2-DVK enclosure and custom label (if required).

Module Certifications:

For datasheet, and other information, go to: 8Devices Carambola2 info.

Contact us

For datasheet, Reference Design information, Drivers, Certifications, higher volume pricing, please contact us.